Thread: Turbo Inlet Intake

Yeah and i'd probably buy it lol I duno if you have welding capabilities? I can pretty much set you up with all the bends you need and all you'd have to do is do it. I can test fit it also And if people want intercoolers with it, just set it up with a ebay intercooler, simple enough.

^^ Why not just make two kits ... one for high and one for low ports. The low port one would have to go under the intercooler pipe and the high port would have to go over.



Exhaust bends are a big no no here. We like Al



If you want do mark the pipes Ill have them welded up and shipped back. If it works then we have a kit. If we get at least 5 then your welds are free. What setups will this kit work with??

I love showing my welders work!

Fine with me. What ever it takes.
I'm thinking you could get this done with two 90 degree bends or a 90 degree and 45 degree bend, no problem.

Ill have the car tomorrow to try some things out.

Mine is a highport gt28r facing down so avenir type.

1 U bend
6 90 Degree including 2 for intake
2 45 Degree
And if your gonna fab something for the outlet off the turbo, Which I'm just using a atp adapter and ordered a 2" 90 elbow to come off it.

then a bung on intake pipe for VC Vent and on the TB 90 for the IACV

I would be interested in a 3" version of what I have now. This is the Hotshot pipe.

^^ One like that in 2.5" would be pretty cool too.

Yeah 3" with the kits, then yoiu can sell the 3" by it's self. Any news on weather your gonna do this, I'm getting ready to redo my piping.

Yeah we are still looking into this, it is a little difficult without a turbo car. I can get the idea of my DE.

I'm sure theres someone near you with a det lol if not send me the pipe I said and i'll mock it up only thing is you need to make a custom outlet off the turbo or use atp adapter with a 90* coupler