Thread: WAI Intakes

Hey there buddie ... lets get these dimensions for the turbo intake pipe wit the BOv vacuum line ...

What in the heck have you two knuckleheads been up to. Yeah I also could use a 3" MAF adapter for the boosting. As far as the intake goes I don't recall what BOV he's using but I think maybe a little larger than 19mm. I think the clamp was 15/16 but we had to tighten it down a lot. Let me shoot you a few pics via email.

these intake's you will be making, or unless you have already made them, what year they for?

Any year any chassis equipped with a SR high/low port, VE or RR.
You have the same (200SX) as mine shown in the pics and it fits great! SuperblackZ is testing the CAi version on his B13 and fitments is good as well.

thats the bov i am getting, and i can get a recirc hose of 19mm or 34mm

GO 34!!

well 34mm it is

So we're not going with my idea of chop and duct-tape the one you have? Your still gonna rock that custom recirc. hose right?

I didnt hear that ... lets start another thread with this. I need to get these intakes going on this one.

One of you name it ill jump in,

but dont the B13's have more or less vac lines than the 200, i have both but dont have them near each other to check.