Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: WAI Intakes

+ Reply To Thread
Posts: 11-20 of 37
2009-02-04 03:34:27
#11
What about an intake pipe from the Turbo Inlet pipe... in 3" to Clear the battery w/ a BOV recirculation port.
2009-02-04 03:37:13
#12
well since Im NA I cant test but if someone local wants to test fit that would be great. If not we could work on dimensions over the wire... Let me see a pic.
2009-02-04 03:42:37
#13
Something like this



This is the stock one



This is a good example



OR like this

2009-02-04 03:44:54
#14
Originally Posted by sentraman



EEW is that exhaust pipe?? Did you want me to follow it around the battery and go CAI into the fender like my cold air does??

Do you have any that show it off the turbo maybe facing the pass side?
2009-02-04 03:57:57
#15
Hope this Helps

2009-02-04 03:58:27
#16
Originally Posted by bluebomber
EEW is that exhaust pipe?? Did you want me to follow it around the battery and go CAI into the fender like my cold air does??

Do you have any that show it off the turbo maybe facing the pass side?



I would prefer to not cut any wholes in my fender well
2009-02-04 04:00:01
#17
Just enlarge ... as far as the recirc pipe. All you want is a large dia nipple to run a vacuum line to?
2009-02-04 04:25:46
#18
about 19mm big, so i can recirculate my Blow off valve
2009-02-04 04:26:45
#19
Yea no problem. Lets get together tomorrow for the dimensions. Ill send you a pm. I can probably get it pretty close using my de as a template. i will need to know some dimensions though
2009-02-04 04:45:47
#20
Ok well i can't get on the forum at work, but you can e-mail me at [email]Lxiong@waxie.com[/email] or get a hold of Benito Malito as he knows the dimensions as well...
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top