Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Plug covers

+ Reply To Thread
Posts: 11-20 of 103
2009-01-28 12:52:00
#11
Originally Posted by Vadim
Yes there is, the oil cap is in a different location.


Is the cap in the same location as the VE cover? If so this one is the same as the DE cover but without a cap cutout.
2009-01-28 13:33:25
#12
Originally Posted by bluebomber
Is the cap in the same location as the VE cover? If so this one is the same as the DE cover but without a cap cutout.


The VE cover should be pretty identical to Roller Rocker.

SR20VE Valve Cover:



SR20DE Roller Rocker:



SR20DE Lowport and High Port:
2009-01-28 14:24:25
#13
Seems like its easier for a VE/RR VC and seems to have more clearance then a DE.
2009-01-28 15:08:29
#14
Originally Posted by bluebomber
Laser at work



Reminds me of a dot matrix printer.
2009-01-28 15:09:58
#15
It just looks like the channel is wider on the VE as compared to the DE??

O and one mor pic before drilling hole and countersinking (nobody sells a low profile or flat style bolt with the right dimensions)
2009-01-28 23:16:31
#16
Here is mine completed showing the hardware that will be included.

2009-01-28 23:18:24
#17
So are you just going to be making these for non-RR DE's?
2009-01-28 23:32:08
#18
Nope ... they will fit the VE, DE (RR and non RR) and the GTIR. Ill fix the website for ease of ordering.
The RR and non RR will fit the same as the VE, the RR valve cover is just taller.
2009-01-28 23:35:11
#19
nevermind answered my own question ..
2009-01-28 23:48:38
#20
I cant sell the RR covers without knowing how much taller they are compared to the DE covers. I need to make sure i make the spacers correctly as well as provide the correct length valve cover bolt. Any help?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top