Thread: Wheels and suspension for NX2000.

Hey, so im looking at a set of Megan racing coilovers, and SSR GTV01 wheels. 15x6" 4x100, with 45mm offset. Any tips? I am looking for a lower stance but still want to keep the stock look. Will this setup work? Im not too experienced with wheels, so any help would be appreciated.

I am not familiar with the Megan coilovers but they should do the trick. Just don't go all slammed on the suspension and they should ride nice and last a long time. Rims look like the right specs for our cars. Just make sure the center bore will fit our hubs. 66mm or so I believe. Trying to go off of memory and i'm getting ooooooold. If smaller, no go. If bigger, get some hubcentric rings or something.

What's your plans for tires? Size? Make/model? With a 6" wide wheel, I would figure a 205/50 would fit in there quite nicely with no rubbing...as long as you are not slammed.

Plans for the car? Just daily? Or occasional track/strip/auto-x? That will help determine what type of tires you should be looking into.

Anyways, just some things to think about.

Branden
aka hawaiiaNX

Personally, I am quite partial to the B14 SE-R and (especially) SE-L wheels on any B13. Here's a few of mine over the years...

Cherry Red Pearl NX2000 with SE-Ls (Stock Suspension) - 195/50/R15 Tires


Cloud White NX2000 with SE-Ls (GC Coils/AGX) - 195/55/R15 Tires


Flat Black NX2000 with SE-Rs (Hyperco Gen 2/AGX) - 195/55/R15 Tires


Black B13 SE-R with SE-Ls (Tein SS) - 205/50/R15 Tires


Black B13 SE-R with SE-Rs (Tein SS) - 195/55/R15 Tires


Can't get much more stock looking than that.

Branden
aka hawaiiaNX

Nvm good luck