Thread: nx suspension

So I've owned my B13 for about 14 years now and had many b14's, p10's and p11's. I just picked up a clean 92 NX2000 with 156k on it from the second owner. I'm looking to do my first auto cross fun with this car. I'm looking for a suspension setup. What would you guys recommend? Will any B13 suspension fit this car? front and rear?

The stock NX2000 springs had a slightly different rate than the SE-R springs, other than that, everything is the same.

C

perfect so I can use all the b13 struts and springs on my NX then?

Absolutely

C

Boom, because I love being so thorough.

The FSM always delivers.

C

perfect thanks guys! It's been awhile since I posted anything, a lot on the old forum lol. So any way of getting some nice springs for my ride? And suggestions on spring rates? It'll be more autox oriented but maybe daily for, but not for cadi like ride qualities lol.

I have used Hyperco springs for a decade on my B14 and they are comfy for the street. I dislike the unpredictability that comes with a progressive rate spring but give and take has to happen.

As far as any other spring out there. Road Magnet makes springs but I dislike them also for various reasons. A lot of that is preferential stuff as well so it is hard to remain objective when this is a subjective area for most.

Going to coilovers is really the best option that way you can cross-jack and get the weights dialed in better.

I second that if you can find some used hyperco springs I auto x on that with just some standard run of the mill KYB AGX setup. Works great on my NX

Road magnets on AGX, I just took part in west coast convention at button willow. My nx was planted to the ground around the track, felt amaziiing.