Thread: NX2000 SR20VET swap

What trans did you blow up? 32V or 70V?

Branden
aka hawaiiaNX

32v

32v with 70v gears

Didn't wanna just go with a true 70V for the strength?

Branden
aka hawaiiaNX

@calvin269 do you already have a base tune for the VET?

Do you have a base tune of your VET?

So, it has been a minute! But, finally started working on tuning it. It has been moved around a few times since coming to AZ. But now I am trying to get the engine bay cleaned up. Get it tuned up and maybe to a track. My tires are good enough for some testing, but going to have to get new ones.

So, I started to work on the engine bay and got a few things fixed and a list of things I need to buy. But, I went to clear out some temp wires I had in the bay. Next thing I know I am in the car removing seats, pulling out the dash, and everything in between.
I forget things. There were so many extra wires under the dash. Looked like a 12 year old trying to wire up stuff. I have a push button start, that was installed and the button sucks, so I wired in a new switch. Then, I was like, I need buttons for the door poppers..... SOOOOOOOOOOOOOOOO many wires. All day removing and wiring up stuff. But, it all looks good under the dash and I decided to move my 2015 touchscreen radio under the HVAC controls.
Now it is time to get everything back together. My dash now has cracks in it. I have been soaking it in furniture polish WITH WAX, trying to make it soft enough to stop the cracks. AZ heat. So, next will be going back to tuning. I should be able to start driving it this week and do some test.
I also bought a new wideband sensor to install. I think I will change oil for good measure. Order some other stuff. Correct the new harness I bought many years ago, then install. So many things to do. Almost 10 years on this project.

So, I got everything back together and ran it around the block. I did some adjustments, but I need to get fuel before I can do some more testing. Anyone got a good TDC for a SR20VET?