Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: What did you do to your NX today?

+ Reply To Thread
Posts: 631-640 of 670
2017-04-28 17:05:24
#631
Bought a pressure washer, gave her a rinse - and reminded myself of the 'one day' goal of getting it repainted. Clearcoat flaking from Arizona sun...
2017-04-29 02:00:02
#632
Originally Posted by calvin269
So over the weekend I tried fitting my projector fog lights. I think I have them where they will work. They take a different bracket, so I am trying to make it work.



I also decided to try and figure out a good fix for the lower front bumper. We will see how it turns out. I am going to use aluminum sheet metal and drill holes in it. Then epoxy it in.





Sub'd
2017-05-12 21:17:22
#633
Finally bolted down my front circuit breaker in its permanent location....aaaaand then proceeded to break the switch. Irritating. Will get some pics once I replace the circuit breaker.

Also, I am going to run a new starter cable so my wiring looks cleaner. Gonna go from the circuit breaker into the fenderwell, and then back into the engine bay under the brake booster to the starter. That should allow me to remove the stock one and clear it all up a bit.

Branden
aka hawaiiaNX
2017-05-17 19:25:03
#634
Originally Posted by hawaiiaNX
Finally bolted down my front circuit breaker in its permanent location....aaaaand then proceeded to break the switch. Irritating. Will get some pics once I replace the circuit breaker.

Also, I am going to run a new starter cable so my wiring looks cleaner. Gonna go from the circuit breaker into the fenderwell, and then back into the engine bay under the brake booster to the starter. That should allow me to remove the stock one and clear it all up a bit.

Branden
aka hawaiiaNX


Before:


After:


Branden
Aka hawaiiaNX
2017-05-29 22:04:50
#635
Sadly, the NX is accumulating less than 500 miles a year now. Charged the A/C with R12 Freon and it's colder than a meat locker Changed oil and used Protectant 303 on all the rubber seals, especially the T-Tops.



Dean
Last edited by DeanOU on 2017-05-29 at 22-37-34.
2017-05-30 08:28:31
#636
Originally Posted by DeanOU
Sadly, the NX is accumulating less than 500 miles a year now. Charged the A/C with R12 Freon and it's colder than a meat locker Changed oil and used Protectant 303 on all the rubber seals, especially the T-Tops.



Dean


This is not sad. Keep that bad boy safe and sound. I don't think anyone has an NX as clean as yours anywhere on this Earth.

Branden
Aka hawaiiaNX
2017-06-01 23:38:52
#637
Installed Place Racing CAI, raced the car at Pocono, and installed the custom valved BC Setup.[img][URL=http://s682.photobucket.com/user/nx2kpa/media/IMG_0075_zpsjgrmfjl9.jpg.html][IMG]http://i682.photobucket.com/albums/vv184/nx2kpa/IMG_0075_zpsjgrmfjl9.jpg[/img][/URL][/IMG][img][URL=http://s682.photobucket.com/user/nx2kpa/media/IMG_0088_zps6o9qwxwt.jpg.html][IMG]http://i682.photobucket.com/albums/vv184/nx2kpa/IMG_0088_zps6o9qwxwt.jpg[/img][/URL][/IMG][img][URL=http://s682.photobucket.com/user/nx2kpa/media/IMG_0114_zpsqac09esx.jpg.html][IMG]http://i682.photobucket.com/albums/vv184/nx2kpa/IMG_0114_zpsqac09esx.jpg[/img][/URL][/IMG][img][URL=http://s682.photobucket.com/user/nx2kpa/media/IMG_0123_zps4kze0fyn.jpg.html][IMG]http://i682.photobucket.com/albums/vv184/nx2kpa/IMG_0123_zps4kze0fyn.jpg[/img][/URL][/IMG][img][URL=http://s682.photobucket.com/user/nx2kpa/media/IMG_0140_zpssddmrubv.jpg.html][IMG]http://i682.photobucket.com/albums/vv184/nx2kpa/IMG_0140_zpssddmrubv.jpg[/img][/URL][/IMG]
2017-06-02 06:13:31
#638
Installed energy master bushing kit, as well as new set of tierods,inners, outers, balljoints, control arms front and rear polyurethane bushings, polyurethane steering rack bushings, polyurethane shifter linkage front and rear, front and rear sway bar end links and polyurethane bushings, rear trailing arms polyurethane, added progress lowering springs on fresh Kyb's, new yokohamas 205/50R15 S-drives on discontinued RacingHarts CP-035R , alignment, and she drives solid , a real pain in the neck to do all by myself in a wknd but it was worth every penny and every second of it im really happy with the results , (crappy roads) feel good you can feel the entire suspension setup its working as a whole i give few taps on my own back for sitting how it sits now
Last edited by ztunedsr20 on 2017-06-02 at 17-49-46.
2017-06-02 18:18:19
#639
Nice round of upgrade and what agood looking NX you have! Watch out for those rear bushings ripping the parallel LCA up. Just happened to @lynchfourtwenty
2017-06-03 02:29:03
#640
Originally Posted by Kyle
Nice round of upgrade and what agood looking NX you have! Watch out for those rear bushings ripping the parallel LCA up. Just happened to @lynchfourtwenty


Yep



To be fair I'm sure they been on the car for years and I've hit some potholes.. luckily we had a parts nx with non broken ones an I had it fixed in bout half hour
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top