Thread: What did you do to your NX today?

Last night it was nice out - so I decided to do some boost testing. Pulled the t28 hose off, plugged it with my wife's arbonne night cream, placed the plug on the connector to the throttle body hose, and got out the bike pump. Found lots of leaks, no good for drawthrough, so buttoned those up, held 20psi without any issues. Put back on the car, likely starting it tomorrow!

I made the decision to buy a sr20ve and tackle the swap from my tired sr20de. Going to slap a turbo on the sr20ve at some point too. My modified Mk6 has spoiled me with boost. Time to show the egg some love

Did you PC those yourself?

Looks nice but unless its a show car it wont last long

It will last longer then any caliper paint. If you clean the parts correctly and cute it correctly.



I do all my own powder coating.

I've had my Z32 calipers on my Z31 powder coated 11 years ago and still shine like the day they were coated.

Liars!!

Ran the 0 gauge cable for my battery relocation. Going to relocate to passenger rear in trunk, hopefully on Sunday. 150amp circuit breakers front and rear and a brand new Optima red top battery. Pretty much going to duplicate chriscar's setup.

Branden
Aka hawaiiaNX

Moved my aluminum/delrin crossmember bushings from my SE-R over to my NX.

Also, did more of the battery relocation work. Mounted the rear circuit breaker, crimped on the ring terminals at the circuit breaker and for the ground cable. Just waiting on my negative battery terminal to arrive so I can pull out the battery and mount the battery tray in the rear and the second circuit breaker in the front. One more day and I should be good.

Branden
Aka hawaiiaNX

Uncovered it and gave it a good bath in preparation for Nismo Fiesta this weekend.