Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: What did you do to your NX today?

+ Reply To Thread
Posts: 471-480 of 670
2016-05-26 03:18:18
#471
Installed the mishimoto radiator, made a hood to intercooler seal for the top mount bluebird, also installed 1/4" hood spacers and removed the weather stripping by the windshield wipers for hot air to escape. Ordering slim fans on the other tab 👀
2016-05-26 07:40:35
#472
Originally Posted by eggman
Originally Posted by hawaiiaNX
Originally Posted by eggman
Got the car paint restoration/buffing done.

Clear turns,smoked sidemarkers and JDM fogs installed...just needs a lip


Damn Jay! I have some smoked sidemarkers that would look mighty good on this egg! They are Stratton's old ones and were on my SE-R. Front and rear. Was hoping to trade them for a set of all clear ones if you can find (or have) a set!

For reference:


LMK!

Branden
aka hawaiiaNX


cool man but those are also the smoked sidemarkers on the egg...lol maybe the angle makes them look more clear ....I dont have any clear sides but I will keep an eye out because I wouldnt mind taking those smoked ones off your hands for spares


Ohhh. I gotcha. Looked like yours were smoked clears in the front but the rears look more red. Mine are clears all the way around, and then they were smoked kinda dark. And actually, i'll prob only need one pair of clears, not a full set of 4, as I havethe EDM front sidemarker delete pieces that are yet to be installed.

Branden
Aka hawaiiaNX
2016-05-26 12:43:28
#473
Originally Posted by hawaiiaNX
Originally Posted by eggman
Originally Posted by hawaiiaNX
Originally Posted by eggman
Got the car paint restoration/buffing done.

Clear turns,smoked sidemarkers and JDM fogs installed...just needs a lip


Damn Jay! I have some smoked sidemarkers that would look mighty good on this egg! They are Stratton's old ones and were on my SE-R. Front and rear. Was hoping to trade them for a set of all clear ones if you can find (or have) a set!

For reference:


LMK!

Branden
aka hawaiiaNX


cool man but those are also the smoked sidemarkers on the egg...lol maybe the angle makes them look more clear ....I dont have any clear sides but I will keep an eye out because I wouldnt mind taking those smoked ones off your hands for spares


Ohhh. I gotcha. Looked like yours were smoked clears in the front but the rears look more red. Mine are clears all the way around, and then they were smoked kinda dark. And actually, i'll prob only need one pair of clears, not a full set of 4, as I havethe EDM front sidemarker delete pieces that are yet to be installed.

Branden
Aka hawaiiaNX


yeah your right I have only a set of 4 smoked so I left the rears red on both nxs and the fronts smoked on each one.....I also have the sidemarker deletes for the front here,but I am putting them on the turbo car..then the front smoked on that car will go on the black one so its all smoked.,,,trying not to mod the black one very much just simple stuff
Mine were molded smked but not very dark smoke maybe thats the difference since yours startted clear?
2016-05-29 17:07:20
#474
After much finagling, got the eBay header on.

Cleaned up my vacuum lines and got rid of AIV/EGR/BPT .

Installed new clutch cable. Much more of a b*tch to do than I remember.

Got my new tires on Nitto NeoGen...we'll see. Had to compromise between 1 or 2 autcrosses-capable and DD for a couple of years.

Also got the new wheels on (thanks @jingjing !)

Also replace the (broken!) shifter stabilizer rod rubber with the Energy Suspensions poly piece.

It's been a whirlwind, I think that's all for now. Still got to do the radio and a few things here and there.





And the 'brothers' together:
Last edited by llaprad1 on 2016-05-29 at 17-09-46.
2016-05-29 17:37:40
#475
^Looks great!
2016-05-29 21:18:15
#476
Changed out my fuel injector on cylinder 1. Was hesitating under light throttle and sounded like a Subaru. All good now though.

Branden
Aka hawaiiaNX
Last edited by hawaiiaNX on 2016-05-29 at 21-19-20.
2016-05-29 21:22:23
#477
What did you do to your NX today?
What is a good source for fuel injectors outside of a salvage yard?

Sent from my magic time machine after inserting crystals.
2016-05-30 18:25:26
#478
Not much but added a Maxima slide-out tray. I love these things!





I plan on putting some kind of felt on the inside.
2016-05-30 19:19:08
#479
Originally Posted by llaprad1
Not much but added a Maxima slide-out tray. I love these things!





I plan on putting some kind of felt on the inside.


do you know if this will go up top where the radio goes? I wanna move my radio down but I want something in that space like a cubby....Its a stock car so no gauges there ,and the stock cubby wont work there
2016-05-30 20:48:56
#480
Originally Posted by 93serprise
What is a good source for fuel injectors outside of a salvage yard?

Sent from my magic time machine after inserting crystals.


Are you looking for stock replacements? Or bigger?

Aside from here on the forum, I would say junk yards would be your best bet. The yards here in Hawaii SUCK, so the forum (or Facebook) is pretty much my only option.

Branden
Aka hawaiiaNX
Last edited by hawaiiaNX on 2016-05-30 at 21-23-51.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top