Thread: Front Bumper cover Parts Help

I was able to get ahold of a decent shape bumper cover to replace mine that is cracked. The cover on the bad side was in the rust belt so the brackets and all the clips are rusted. I called G spec to see if we could pinpoint what parts I needed. I'm going to reuse my brackets off my old one if I can. I just need to know what part number it is to replace all those bolts that hold the bottem part where the fog lights go. I want to try and get these clips and such just in case mine break off when removing my old cover.

Here is a link that greg sent me to figure out what part numbers I need.

620 Front Bumper :: Body(Front,Roof & Floor) :: Genuine Nissan Parts :: Sentra / NX Parts (B13) 1991-1994 :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com

and a pic of what I need



thanks in advance for any help

I removed the bumper on my 1993 NX2000 a few years ago, and I encountered the same corroded fasteners and bolts. Here are the part numbers:

01241-00113 fasteners
01436-00511 bolts

Buy at least 8 or more. They're cheap.

Good luck,
Dean

pull them off and take one set to a parts store. they have all sorts of fastners that will fit and do the same exact job.

i did this one time on my nx.

stratton.

Thanks for the part number I sent it off to greg just now. Not only are those rusted but the brackets on both sides and the top are rusted. I'm trying to see if I can get a replacement set so I don't have to tear my old one apart. I just want to drop it at the body shop and have it all ready to be painted and installed.