Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Trim Bleeding Black

+ Reply To Thread
Posts: 1-9 of 9
2011-06-29 19:15:58
#1
Trim Bleeding Black
All of the trim on my car is bleeding black. After I wash it and come back out there will be black drip lines from the trim where it bled black and dried. I have tried washing it numerous times. I have tried rubbing the trim down to try to get all the loose color up but every time the trim lets of black. When I try to wax the trim bleeds black into the wax. Anyone else having the same problem? Any ideas on how to stop this?
2011-06-29 19:48:00
#2
sand it down an repaint it then clear coat it maybe? its not difficult to just paint the trim really
2011-06-29 19:52:34
#3
it isn't just the painted trim. it is the rubber trim that is the biggest problem.
2011-06-29 20:04:47
#4
IS it possible to get new trim from Nissan for the NX?
2011-06-29 20:06:42
#5
what trim are we talking about Exactly ?


i have seen cars that have had lots of dirt an other crap in the trim that took hours of pressure washing to get rid of.. it would piss me off cause my boss would be like WTF?
2011-06-29 20:07:56
#6
THe ones that run from the door the trunk area, the 2 pieces that always peel and flake when baked in the sun.
2011-06-30 06:22:55
#7
Window trim?

If it is window trim all you can do is replace or recoat it. I used Kiwi heel liquid shoe polish. Just make sure there are no bubbles and everything is taped up good that you don't want covered
2011-06-30 16:23:11
#8
You can buy new trims,
I bought both doors and the rear trims, looks really nice now!
2011-06-30 21:32:14
#9
One of the most annoying for me is the trim around the spoiler. I have spent tons of time at pay and sprays pressure washing and it never seems to go away. window trim too.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top