ok so i figuered it out.the white gear inside has an ar that needs to be flipped.
took a bunch of pics if anyone is interested....
remove the motor from the hatch by 3 10mm socket bolts,diconnect harness and this is what you get
unscrew the 4 total cover phillips screws,one as a ground..
this is what it looks like once opend.the motor is in the CLOSED , or vertical postioning, look at the linkage on the white gear
next up is the ACUAL motor to be removed...only 2 srews for this one...carfull as its pulled out as the connections on the outside are to the brushes for the motor
before at whole assemly was taken out of the hatch. i marked the wiper spindle so i know which wasy i wanted it to move. showing my mark UP, or vertical postion, or closed postiooin of wiper
this is the NEW postion the spindle needs to be
take note of the wire connections,as you dont want to blow fuses..and in the centerof the asemly you should see the C clip the holds the spindle of the white gear into place(above black sensor)....REMOVE the c clip to pop out the gear
another C clip is here on the other side too.this one holds the LONGEST arm to another arm ON the gear. I ALSO MARKED WITH YELLOW THE TOP PART OF THE GEAR. THE GEAR ITSELF MUST REMAIN SAME AS BEFORE,only the arm attached is going to be flipped 180*(future pic)
once you get it all out looks like this...youy can see the sensor on the white gear and the pins that touch it in this pic...
once that spindle that holds the white gear is removed and the arm atached,the arm needs to be FLIPPED or rotated 180* and reassemled back ont the white gear, BUT the part of the gear will need to be shaved down a small amount.razor blade worked good.notice thw yellow,showing what ^ up is in proportion to the sensors.
and this is being reassembled. all arms are facing differnt than before.
re install the C clips. abnd button up the motor and case cover and go reinstall it on the hatch... after all assembled i checked my original marking on the wiper spindle and it in fact is the CORRECT postion. motor closed,wiper horizontal.
now a final pic.