Thread: EDM parts requests

Edit....info corrected.

Okay, so I've been stripping my NX over the last few days. I've got a heap of parts lying around right now.

First of all, I once bought a set of clear front indicator lenses. Anyone remember "ordering" these? I can't remember who had. I can't find anything in my PM inbox (damn you, searchless PM inbox!!!).

Anyway, here's a list of the parts I have removed and are available:

- Another set of T-top shades with the carrying bags
- Parcelshelf holders/hinges (the ones that sit on the sides and always tend to break)
- P10/RNN14 HVAC controls (the one with the push-buttons and dial, instead of the lever-system), including motors, screws and custom wiring (which is a bit long, but you can wrap it around stuff). Only need to splice in 2 wires into a grounded wire. Otherwise, plug and play. Doesn't have the button for AC, though.
- Rear speakerbrackets and speaker covers
- Leather shifter boot, 1 tab is broken, but otherwise in good shape (and you wouldn't notice the tab missing anyways)
- Aftermarket floor mats, black with a red bezel, on the 2 front mats it says "100NX" in red, BOLD. Driversside is a bit dirty, but a good cleaning would do wonders.

I also have the following stuff lying around:

- EDM cubbies
- EDM driver's side wiper arm with spoiler (to aid wiping during higher speeds)
- Calum RTv2 OBD-I B13 ECU (the one with all the extra features, including VVL control and launch control)
- Digital gauge cluster with correct speed sensor for a manual SR20DE, works 100%
- Short shifter (brand unknown), works great, a little play in the joint

Stuff not specific to an NX:

- Lowport InJen intake, including MAF adapter and filter
- JDM B13 folding mirrors



Finally, I will check if the glovebox of an EDM NX can be fitted to an USDM NX, Andy (Socius) was so kind to supply me with some pics.
I noticed that the glovebox in an USDM NX is so very small, as compared to the one in the EDM NX (the USDM one is an actual storage behind the door, whereas the EDM one is much wider (covers the plastic part next to the USDM one as well, and tilts out of the dash).)

Pics and shipping quote for B13 pwr folding mirrors...to 78666. I'm sure the switch is included as well, correct?

...and that front lip?

I think it might have been @gumby510

@Sentraga, @Socius, @gumby510 and @1fastser: As you are all wanting to buy either spoilers or bumperlips, I suggest you all band together in shipping. I'm still working on getting all the parts, but I have a lot on my mind right now and parts getting scarce.

I suggest you guys ONLY ship the bigger parts together, and ship the smaller things like steering wheels etc. separately (I can fit the spoilers together, using as little room as possible, whereas parts like the wheels cause the package to become malformed (or at least not a nice shape).

Don't worry, I haven't forgot about you guys, the same goes for @Kleensleeper (I know you might feel like that), I just need to find the time (and room!) to make decent shipments :P

Which ones?

@Sentraga, @Socius, @gumby510

I'm also looking at getting a front lip...how will the combined shipping work? I'm in Texas @78666.

Thanks...Jody

I'm waiting for a hatch spoiler, a rear bumper, and other small items. I'm sure the front lip can fit in the box just fine, and I could drive it down to you so it doesn't get repackaged or drive up your shipping costs.

That would be great! I didn't realize someone relatively close to me was ordering items also. Beers and food will definitely be in order!

I wanted to meet you when I picked up that Red NX from Derek a few months back, but he said you were no where to be found.haha

But yea, once its all in order and the shipment can be made I'd be more than willing to drive that down to you.