I replaced the cardboard with a 1/4 ply wood b/c my cardboard was no good anymore,, and I did put a screw in there ro help hold it in place,, rides nicely back there
I have taken a wedge stle truck box,flip it facing downfiring,and put feet on it.
Works greaat,and you can slide the ttops underit.I dont have pics,but you should get the idea.
Originally Posted by Tearoffguy here's my 2 Nx ,, I corner load mine and it seems to be fine,, I do have 2 small screw in one spot,, of course I remove it when I Auto x.....
i had 2 12s before like this...not bolted down.....and one day i had to SLAM on the brakes,the backseat wasnt CLICKED into the locks, and the sub box flew and hit the back of my driver seat..........
i nearly **** myself..
0 Likes
Be the first to like this post.
-pedro
1993 nx2000 sr20VE 1991 nx2000- PARTED OUT 2008 maxda3 hatch 2007 trailblazer LS 2011 Explorer
Originally Posted by PEDRONX2k i had 2 12s before like this...not bolted down.....and one day i had to SLAM on the brakes,the backseat wasnt CLICKED into the locks, and the sub box flew and hit the back of my driver seat..........
i nearly **** myself..
Something like that happened to my friend in his HB S13 lol. He had a can of race gas in the back seat and he slamed on the brakes cause of a red light. Saw him get pretty good by the can rolling from the back to the front.
I mounted the amp under the passenger seat and wired it up. I hooked up the 10" sub and it's sounding good. Might need a capacitor now lol I saw the brake light blinking when the base would hit (had the Ebrake up).