Thread: NX2000 Awd Conversion

Exhaust is wrapped & sprayed with Dei silcone spray as well as installed. I decided to use the stock B13 harness so I did all the wiring last night for it to work on the engine. All you need to do is follow the instructions Snickers on G20.net has (How to: GTiR G20 P10 swap... - G20.net - Forums) If you use the awd tranny you will also need to swap one of your starter plugs as well as rewire the transmission plug (neutral switch). I'm currently finishing up with tracing and rewiring the transmission plug then I just need to switch harnesses on the engine/tranny.

Nick, let me know if you need a hand i have half of tomorrow off and fir,sat and sun. I may have to stop by and see if you have a couple of things i need to get my nx up and running. I will call you tomorrow.

IT'S ALIVE!!!! But not test drive yet.

Here are some shots of the exhaust. From the end of the downpipe all the way back is wrapped with the hear wrap.




Dynomax muffler


Over the rear


Between fuel cell and subframe


Cheap exhaust tip

Engine bay is done except I need to do some tidying up.




Interior is in






Test Drive Results!!!
Alright I brought the car to a local car show about 3-4 miles from my house today. Engine runs real good, great throttle response and theres lot of potential. I do have 3 issues to take care of at the moment before the next one.
1) My passengerside (Gti-r driverside) rear caliper is sticking so there is alot of drag
2) It needs a major alignment (bounces around its off so much)
3) Exhaust clearance is alot less then I originally thought so I may need to actual make a tunel in the floor for it.

Everything else seems to be working good at the moment. sorry I don't have a vid of it going down the road since I couldn't really do a pull yet.

congratulations man, cant wait to see the thing in action. Take your time fixing the things necessary and then definetly get us some vids, maybe even going through a puddle and a nice 4 wheel spin/launch, haha

Props man i really wish i could afford to do an awd conversion on mine, i have the built motor for it and definitely need some traction hahaha

thanks one other issue i'm having which confuses me is my wipers & front blinkers don't work. I used the stock engine harness and rewired it for the necessay plugs so i'm not understanding why its acting up at the moment. I'll just have to recheck all the plugs and hopefully the bug works its way out.

The blinkers and wipers are in the main harness, not the engine harness.

yeah I know thats why i'm a bit puzzled why they aren't working, they did work before I removed everything