Thread: Anyone local have a MAP sensor?

I need a MAP sensor and pigtail like asap. Also need a B13 trigger wheel for the distributor to run my AEM. If you have either of these please contact me and let me know. Thanks.

If its any easier to source, I'm using a stock MAP sensor from a WRX, you just need any 3 bar (for NA of course) MAP sensor to run on the AEM.

Ill have to ask around and see if any of the subie guys have one. Thanks for the info!

Just bought a new map sensor. If anyone has a trigger disk I can buy let me know. If you have one you need later but are willing to let me borrow it in the meantime and buy a new to replace it that works too. Thanks!

Ha ha, that makes it easier then! They aren't super expensive.

Are you needing the AEM trigger disk?

CAS Disk for SR20DET RWD, KA24DE (50mm OD) <-- this is the one you need, its a 24 + 1 trigger disk.

You sure? I thought that was the wrong one for FWD SR's.

Very sure sir, its a 24+1 disk and I've had 2 others recently buy it and its the same that came in my V2.

The AEM V2 for most Nissan SR20's uses a KA24DE box which comes with this disk, the 30-8761 is a RB25 disk (additional teeth), and the 30-8762 is a 54 diameter which won't fit our CAS.

AEM V1's used this for all FWD cars, if your worried call over and talk to AEM, they'll point you to that pretty quick!

Hmmm. I am tempted on buying one off ebay and have it shipped over quickly. Thanks for your help man!

No problem sir, AEM is pretty quick on shipping too, not sure the price difference, but usually they send them same day because they always have them in stock. Then again I always call direct, I haven't ordered from the site.

Well, just spoke with AEM. He said to measure my stock disc which was 54mm and said that was the one. Apparently the B14, B15, 20V, and RWD run the 50mm discs. I guess the B13 was the larger diameter wheel.