Thread: Performance & Styling, Manchester CT

Just had John from Performance & Styling in Manchester CT dyno tune my 200sx SE-R with a T25 turbo and all I can say is wow. Not only is he a great guy to deal with, he definetly knows his stuff!! My car was making 180hp at 200ft lbs when I pulled her in and by the time we were done on his dynapack he had it tuned to 238.8hp and 268.7ft lbs of torque at 12psi. Would have turned the boost up more but she was spiking to 15psi because of the stock wastegate setup. All in all his shop has a great atmosphere and I'm very happy with my tune. Love getting on the highway at 40mph in third gear and flooring it and just burning tire! Thanks again John!!

Josh

wow! great numbers!

what supporting mods do you have? nice gains

What tuning software were you using??

John was using Nistune and TunerPro RT, I have a calum basic board in my car now will be upgrading to Nistune Realtime soon though.

Here is the supporting mod list:

Competition Clutch Stage 2 clutch
BRM 3" stainless steel exhaust system
Custom 3" stainless steel test pipe
VRS 3" stainless steel downpipe
Bluebird manifold and J-pipe
Bluebird Journal bearing Garrett T25
JGY 26.75L x 6.20H x 3.50D inter-cooler
Custom 2" hot side; 2.5" cold side inter-cooler piping
Bluebird intake pipe
Greddy Type RS blow off valve (running recirc)
Circuit Sport 250cc oil catch can
Calum basic ECU
Nissan SR20DET 370cc injectors
Walbro 190lph fuel pump
300ZX Z32 MAF
Autometers Ultra light oil pressure gauge
Autometers Ultra light 35psi boost/vac gauge
AEM UEGO Wideband A/F ratio gauge
AEM Tru-boost boost controller
Greddy Turbo timer
Nissport oil sending unit adapter and EGR block off plate

Josh

nice numbers deft one of the best guys to go to for work on nissans deft. knows his ish

thanks for the prop. Was fun day working with your car. looking forward for your next step

anytime man, btw just ordered an external Tial 46mm wastegate to try to level out all the boost spiking. Im saving up for a top mount and probably going to run a t3/t4 or a gt35r with some 770cc injectors. I'll bring my other ecu over after I get everything all squared away for the top mount setup so we can set her up for a Nistune board.

Bump for my boy John. Comes through in the clutch for me all the time. Awsome fab work etc.

When did you open a shop in Manchester John? I remember dealing with you back in the P.C. of A days. Probably don't remember me as I was just getting into the game back then and have been on a break for a while taking care of more important things. You looking for any help at the shop?

I opened shop last march. your welcome to come by anytime.