Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: NismoTronic 3.9.005 Update: Set Timing Window and Misc GUI improvements

+ Reply To Thread
Posts: 31-36 of 36
2014-01-12 14:56:38
#31
Originally Posted by Evlnxr
Thanks John, i think that is actually close to how the description needs to be, less acronyms and more words and examples. All the bits with the underlining take a while to read and decrypt each label as you go along the line, and it all just ends up getting lost or wrong in the understanding of what its doing.


The names with underscores I made explicitly so they can be searched easily. In the help, highlight the whole name (including underscores) with the mouse, hit ctrl-C (hold control key (ctrl) down and hit C key) to copy the word to the clip board, hit ctrl-F to pop up the "Find" dialog, then hit ctrl-V to paste the word into the "Find" dialog. It will highlight all occurrences of the word and you can search for it in the document. This makes finding the definition easy.

You can also open the help html files directly into your favorite browser and use its search function.

As for the acronyms, they actually make understanding and finding things much easier. For example, "dTPS" stands for "delta (or the change in) Throttle Position Sensor", so you can imagine what a mess the help would look like if every occurrence of "dTPS" was replaced with all that verbage.


Originally Posted by Evlnxr
Ive managed to get the dreaded ocillating idle back again, goes from 1k to over 2k when i stop at lights or when backing out of driveways etc. Prob something ive changed incorrectly while trying to fix a accel or decel or idle issue. Timing is swinging from 7 deg to 24 deg, and afr goes super lean, which is not a fuel map issue, or timing on the timing map, and idle timing control has a max value of 4 deg, so no idea how the timing can swing so far.


All of the ignition trims are logged on the "Data Screen", so that will tell you which trim is causing the "Final IGN" timing to change. You can then step through the log and watch the table trace to see whats effecting that trim.

Dave
2014-01-12 17:56:41
#32
is there a turbo timer feature for the fans??? jus wondering
2014-01-20 10:17:43
#33
accidental reply
Last edited by Dala on 2014-01-20 at 12-55-09.
2014-01-27 04:07:02
#34
Just updated to latest version and logging stopped working, tried closing/reopening nemu, reloading calibration but no luck. I'll try reinstalling nismotronic from scratch.
2014-01-27 04:39:35
#35
Completely off topic but... has anyone noticed what subforum this thread as well as the last Nismotronic thread have been posted in..?
I'd never even seen that vendor...
@JKTUNING
2014-02-03 18:41:04
#36
Originally Posted by Nicoxis
Just updated to latest version and logging stopped working, tried closing/reopening nemu, reloading calibration but no luck. I'll try reinstalling nismotronic from scratch.


Issue revolved, thanks to Dave! @OnTheChip
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top