Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: NEMU battery died and wont hold a tune.

+ Reply To Thread
Posts: 1-6 of 6
2018-10-09 17:23:18
#1
NEMU battery died and wont hold a tune.
Just FYI, doesn't look like these are self charging.

Mine died, and didn't hold a tune. The fix is relatively simple, replace the battery!

PN# BR-2330A from Digikey

Took all of maybe 5 min to replace the battery by unsoldering the 3 points, cleaning up the pads, then soldering in the new battery.

That is all.
2018-10-10 08:05:54
#2
Yay a new write up!
2018-10-20 17:16:58
#3
Good info, I had wondered what would be the outcome if the battery dies. Just to replace the battery and reload the tune and its business as usual? Might be worthwhile to replace with a socket type battery holder and then easy to replace with regular CR3032.
2018-12-17 17:45:01
#4
Originally Posted by yoshoto
Good info, I had wondered what would be the outcome if the battery dies. Just to replace the battery and reload the tune and its business as usual? Might be worthwhile to replace with a socket type battery holder and then easy to replace with regular CR3032.



yep exactly that. replace battery, reload tune, all is well. I was considering doing the socket type but wasn't sure as to the mounting spacing to get everything lined up like it was from factory. I have a few spare batteries though now and can send them out to whoever may need one in the future. Pretty cheap when you buy them in bulk, less than $2 each iirc.
2019-03-24 17:11:35
#5
Zeneffect please contact me. Your mail box is full and I need a battery from you
2019-03-27 17:10:02
#6
PM sent, I'm not clearing my inbox because F that. one by one with over 1000 messages, not worth my time.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top