Thread: nismotronic SR20DET S15

Hi guys!

We have loaded the basemap supplied for the s15 however the car will not start. It will just crank on and on and dump fuel.
Might be worth mentioning we had to switch one wire from the harness for the fuel pump to prime.

Please help.

Posting specs of your setup along with your bin would help folks assist you.

Also, i'd like to add you would be far better posting this in the Nismotronic section.

thanks but it seems that i can't post in the nismotronic section.

Car upgraded with AVCR, FMIC and everything apart is stock.

@bono I have moved this thread to where you wanted it, I also approved your second post, and removed you from the newbie group so you can post most places now.
Sorry for the delay.

Check your timing again., tdc after compression stroke. check for sparks.


Does it start on stock ecu?

yes it starts on stock ecu

Post your tdc. and cranking log.

issue is that there is no livedata. I will try again tonight and forward you same if possible

See this FAQ thread
http://www.sr20-forum.com/nismotronic/58796-logging-values-not-being-displayed-fix-here.html
TLDR: no livedata, cut 3 cables (7,14,15), livedata appears