Thread: logger status cant go to live

+ Reply To Thread

First

Posts: 11-15 of 15

Search Thread

2015-09-17 13:07:33

#11

squirlz

MoreNuttyThanASquirlTurd

Join Date: 2007-12-16
Location: Madison, WI
Posts: 3,045
Trader Score: 48 (100%)

Originally Posted by JKTUNING

You can try replacing the capacitors in the ECU first.

Are you referring to all of the electrolytic capacitors or just some specific ones?

- - - Updated - - -

Originally Posted by Dala

I was under the impression that you had to cut the cables at the ECU connection, not the actual consult port? I cut mine right at the connector, worked perfectly!

Correct

0 Likes

Be the first to like this post.

92 Infiniti G21 - 242 WHP & 182 Ft-LBs (Mustang Dyno) - NA 88mm 12.5:1 VE, N1 cams, Xcessive Intake, Q45 TB, Mazworx Header, 3" Exhaust, Nismotronic ECU on MAP and IAT.
View The Build Here

Reply Reply With Quote

2015-09-18 03:16:59

#12

zurud

Member

Join Date: 2010-09-20
Location:
Posts: 103
Trader Score: 0 (0%)

John, can I send the ecu to you for soldering the capacitor and check the ecu or should I just buy another nismotronic package?

0 Likes

Be the first to like this post.

Reply Reply With Quote

2015-09-18 05:41:24

#13

Dala

Member

Join Date: 2012-02-07
Location: Finland
Posts: 1,174
Trader Score: 4 (100%)

Originally Posted by zurud

John, can I send the ecu to you for soldering the capacitor and check the ecu or should I just buy another nismotronic package?

Was the ECU working before you installed NEMU into it? If then, I'd not suspect capacitors to be at fault.

Did you cut the three wires at the ECU plug?

0 Likes

Be the first to like this post.

Reply Reply With Quote

2015-09-19 05:13:16

#14

zurud

Member

Join Date: 2010-09-20
Location:
Posts: 103
Trader Score: 0 (0%)

Yes, the ecu works before and after install. the car still runs but extremely rich 9.2 AFR. I cut at the consult port.
The four wires are going to consult port anyways. Four wires going to consult port,, pin 23, 7, 14 and 15. chk, tx rx and clk.

0 Likes

Be the first to like this post.

Reply Reply With Quote

2015-09-19 12:14:51

#15

Dala

Member

Join Date: 2012-02-07
Location: Finland
Posts: 1,174
Trader Score: 4 (100%)

Originally Posted by zurud

You know what, i had the exact same problem when i installed the bluetooth module to nemu. Afr at 9, running limp mode. I solved it by removing nemu from the ecu and connecting to it on the bench. Then i redownloaded the tune to it, and installed it back into the ecu. Then it started to work.

Also, cut the logger cables at the ecu connector instead! Good luck!

0 Likes

Be the first to like this post.

Reply Reply With Quote

First

+ Reply To Thread

Thread Information

There are currently ? users browsing this thread. (? members & ? guests)
StubUserName