Thread: wiring up a/c switch?

can anyone point me in the right direction on how to rewire my a/c button so that my nemu can recognize it as a input switch? thanks in advance

I had to run a wire direct from the actual switch to the input on the ecu. There must be some items between the switch and the input involving the climate control/ vent controls.

If you are using the switch for aircon, it recognises the input as aircon, but only if the fans are on.

I also heard I could ground the wire on the actual ac comp. Plug....?

All I did was jumper the A/C pressure switch connector, and the blower has to be on.