Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Will my ECU support EBC?

+ Reply To Thread
Posts: 1-6 of 6
2014-10-11 08:04:46
#1
Will my ECU support EBC?
I run Nismotronic on my EUDM ECU;

"A11-B70
96
23710 71Y05
A11-B70-Bf7 1327"


I know that I have no EGR functionality in this ECU, but now when I am installing my EBC I ran into some issues.

I have no AIV pin?! I was about to wire it into the "Pin 102 - AIV", but I have no wire coming from the plug. The physical pin is on the ECU though.
Can I wire an additional pin into the connector? Or does it mean that the ECU has no functionality for that pin? Help!
2014-10-11 09:11:55
#2
Update!

I soldered a wire directly to the PCB at pin 102. Opened up nismotronic, enabled boost control, set initial duty to 100%.

Measured the resistance between Pin 102 and ground. Infinite resistance. This means I have to get an USDM ECU to get this to work. I am testing this right, yes?

This sucks! The solenoid is already installed and wired into the bay Anyone got a spare ECU for sale? :P
2014-10-11 12:57:57
#3
There is a usdm b13 ecu for sale in the classifieds. @daveracer
2014-10-11 14:53:59
#4
Unfortunately neither EGR or AIV is supported in the euro ECUs, which is the only reason they are not in the support ECUs list.
2014-10-13 15:44:07
#5
Thanks for the tip ebinkerd, I am waiting for a shipping estimate now.

@OnTheChip
This one will work right? There are no numbers in the field where all the supported ones are listed, but google tells me it's an 64Y02
2014-10-13 20:35:24
#6
Yep, 64Y02 is fine.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top