Thread: Flat shift setup

Didnt come with it so ive ordered one from nissan, I like the idea of that though, with the ascd switch closes as soon as you press the pedal rather than having to depress it all the way down. How do I go.about wiring it up, easier to go straight to the pins on the ecu or use an adc on the nemu?

The switch is closed when the pedal is released and opens when the pedal is pressed. Easiest way is to connect one side to either the PSP or A/C switch input (assuming you have a B13 ECU) and then just ground the other side.

Can we use some Nissan brake light switch as a clutch release switch ?

If you mean mounting a brake light switch to be actuated by the clutch pedal, then yes.

I mean that do brake light switch work as clutch switch for flat shift or not !
But now i have already installed brake light switch to try and input going to ADC 3 channel !
I get 5v when clutch is released and if i press clutch pedal voltage drops to 0 !
That way switch is working but not properly as it working like on/off but i need so that when clutch is released then voltage is 0 and if i press it then voltage rise to 5v like off / on !
Does these clutch switches what using in cruise control working like off / on ?
So what you think does some universal clutch switch going to work ?
Here in Europe i can't finde N14 with cruise to get clutch switch from !
Do you know some Nissan OEM code for the clutch switch that mounts to N14 clutch pedal bracket (it need to be M10x1.25 thread) ?

I was incorrectly thinking that the brake light switch would work, but it makes contact when the pedal is pressed. The ASCD clutch switch and ASCD cancel switch on the brake pedal both open when the pedal is pressed. There are two ways to solve the problem:
1) use an ASCD cancel switch from either clutch or brake pedals.
2) Rewire the brake switch as a pull-down as shown below:



I apologize for the misunderstanding.

Dave

Thank you Dave ! This schematic helped me out ! Now i have flat shift and i need to lern how to drive with that !

what settings in nismotronic do you change/turn on to get this to work? I've tried to get this to work in mine but I must have done something wrong.

what settings do you need to change in nismotronic? I've tried this set up but can't get it to work, I must be doing something wrong.

The bottom of this page should help you.

NismoTronicSA Help - LIMITERS Tab