Just as I posted in the title...the past couple updates caused be to loose live data logging. My consult wires are snipped and have it setup to automatically turn it on. Also I am not in record mode.
Have you opened up the ECU and checked the solder connections and check the plug to make sure it is seated correctly for the consult. Also check the USB cable. I would think it is hardware related at this point since you are the only one having the issue.
0 Likes
Be the first to like this post.
92 Infiniti G21 - 242 WHP & 182 Ft-LBs (Mustang Dyno) - NA 88mm 12.5:1 VE, N1 cams, Xcessive Intake, Q45 TB, Mazworx Header, 3" Exhaust, Nismotronic ECU on MAP and IAT. View The Build Here
I can upload to the ecu to make changes and it responds to it. I havent open the ecu to check but I also havent touched it since it was working. I will give it a once over.
I had an issue with it taking a long time to connect. Then i started plugging in the USB as i started up the computer, then starting up the SA software, never had an issue since.
0 Likes
Be the first to like this post.
92 Infiniti G21 - 242 WHP & 182 Ft-LBs (Mustang Dyno) - NA 88mm 12.5:1 VE, N1 cams, Xcessive Intake, Q45 TB, Mazworx Header, 3" Exhaust, Nismotronic ECU on MAP and IAT. View The Build Here