Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: SA Programmable Outputs

+ Reply To Thread
Posts: 1-4 of 4
2013-08-21 23:56:18
#1
SA Programmable Outputs
With the RT version i could set up 3 outputs separately, one for each cam and one for my shift light/buzzer, and i even had a spare left over. Now with the SA version i can only run 2 outputs, i combined the cams to be able to keep my shift light/buzzer. Is there anyway to bring back the individual outputs?
2013-08-22 10:03:40
#2
Yes, on the outputs tab there are still output controls for aircon output. I haven't got my laptop with me but I'm fairly certain all 4 outputs are still there, just labeled different
2013-08-22 14:36:10
#3
Originally Posted by squirlz
With the RT version i could set up 3 outputs separately, one for each cam and one for my shift light/buzzer, and i even had a spare left over. Now with the SA version i can only run 2 outputs, i combined the cams to be able to keep my shift light/buzzer. Is there anyway to bring back the individual outputs?


You can use any of the output "special features" to control an output.

You can use the nitrous output to turn on an output, just like you can with the general purpose outputs .. then just leave the nitrous fuel and timing at 0.

Like @Evlnxr stated, you can also use the air condition output as well in that section.

We aren't going back to the old way of doing things as that was very simplistic, the new version is much more flexible .. you just may have to think outside of the box a bit to use some of the features for things other than what they are listed as.
2013-08-23 01:25:48
#4
Thank you for the input. That should do what i need to.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top