Thread: accel enrichment

I know just enough to be dangerous, But there seems to be many things asked that I haven't seen in the documentation online.

One of the tables I saw earlier had cells so small I couldn't see the rest of the writing. Resizing the window didn't change it.

Whats cool about nismotronic is you can goto the help thing and then go click on stuff in the different tables an such and it'll take you straight to it in the help thing... well for most things, however I think some stuff needs elaborated on.. im sure they will get around to it though..

bumpity bump lol

Next version will have accel logging added to the data packet.

I am working on it!

oh if your going to do an update soon can you add direct wideband back to the monitor window list, i swear it was there before, but is not now.

slightly off topic here, i enabled my IAT sensor an map sensor (got em workin but the IAT needs dialed in i think) anyways one thing i noticed right away going over my log is that because the IAT sensor is reading much higher temps (i think) then what it should it was pulling timing because of the IAT Ignition trim, so i set the numbers to 0..

then i looked in the fuel trim section an found an IAT Enrichment table, now i looked in the help section an it says this is only used when the MAP sensor is set to active load source, However, when i set these numbers to 0 i had to take some fuel back out of my fuel map up top (high load / rpm) even tho im still set to MAF for my load source..

anyways just wanted to report my findings, i also think i found the enrichment table i needed to adjust, dTps Rate Factor. going to test it tomorrow.

Mind sharing with me the table?

I don't have any issues with any of the laptops I have used with sizing issues.

A screenshot would be helpful.

yeah thats the one im talking about, i think the newer versions of SA are different from the demo so some stuffs changed or has moved around.