Thread: TPS above 4.8 not recognized as 100% in nismotronic rt

As I look in my datalog, I noticed value for tps above 4.8v is not recorded as 100%. It is recorded as 7.84%. My tps voltage max at 5.05 v. Is there anything I can do to record value above 4.8v as 100% in the rt. I am not ready to move to sa yet.

Once you go to SA and get the hang of it you wont go back.

We would need your TCD as well as the log to have a look at it and see.

As far as i can see there isnt anything in RT that controls TPS span, so not sure why its doing that unless the tps is faulty.

This looks like a logging issue. I'll have John take a look.

Thanks,
Dave

zurud,

Your battery voltage looks a little low, especially after 3000rpm. Could be an alternator problem.

Dave

About the battery voltage, at the battery it read at 13.4. At the ecu it read 12.0 . I need to look into my wiring again.