MAP sensor is in. Temp sensor and bung are on their way. I'm probably going to hook up my MAP sensor this evening before I go on our cruise so I can log that shyt. Should only take a few minutes to hook up.
92' SER -Pulsar/VVL combo on E85, 11.31 ET @134mph, Full weight, street car, A/C and sunroof, PTE 6262 at 19 psi (low boost) Now running Nismotronic SA
73' Datsun 510 with SR20DET (project)
73' Datsun Drag Car in the works
Not really but it was worth a try. I'm sure I'll get it figured out with the speed density setup like how I did with the MAF setup.
0 Likes
Be the first to like this post.
92' SER -Pulsar/VVL combo on E85, 11.31 ET @134mph, Full weight, street car, A/C and sunroof, PTE 6262 at 19 psi (low boost) Now running Nismotronic SA
73' Datsun 510 with SR20DET (project)
73' Datsun Drag Car in the works
Originally Posted by kevwal Hey John;
I hope you will have a Turbo, 1600cc, E85 base tune available.
Actually I do.. !
I recently did a RWD SR20DET with an OMNI 4 bar and 1600cc injectors on E85 with the new SA firmware.
I can easily port that over to be used on a FWD ECU without any issue, that is the beauty of the new system!
Nice!
Now I really can't wait.
0 Likes
Be the first to like this post.
92' SER -Pulsar/VVL combo on E85, 11.31 ET @134mph, Full weight, street car, A/C and sunroof, PTE 6262 at 19 psi (low boost) Now running Nismotronic SA
73' Datsun 510 with SR20DET (project)
73' Datsun Drag Car in the works
I looked up my ECU part number, and from what I've found, it's out of a '93 G20. The only ECU diagrams I have found don't list an EGR Temperature sensor pin, but they do list a straight up Air Temperature Sensor pin (#26). Should that work with the new firmware?