Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: NismoTronicSA Tuning Packages

+ Reply To Thread
Posts: 71-80 of 93
2012-07-04 08:16:32
#71
I'm so excited with my nemu RT ECU
2012-07-29 16:06:38
#72
Where the black wire of the four wire connector that goes into the NEMU goes into the ECU pins I an not getting some signals logged into the nemu like when fan comes on it doesnt show on the NEMU and neutral switch either..
2012-07-29 16:23:00
#73
Originally Posted by Payu
Where the black wire of the four wire connector that goes into the NEMU goes into the ECU pins I an not getting some signals logged into the nemu like when fan comes on it doesnt show on the NEMU and neutral switch either..


The black wire is NOT used.

The only wires that are used are the orange, red and brown wires, so 3 out of the 4 wires on the connector.
2012-07-29 16:32:52
#74
Originally Posted by JKTUNING
Originally Posted by Payu
Where the black wire of the four wire connector that goes into the NEMU goes into the ECU pins I an not getting some signals logged into the nemu like when fan comes on it doesnt show on the NEMU and neutral switch either..


The black wire is NOT used.

The only wires that are used are the orange, red and brown wires, so 3 out of the 4 wires on the connector.


Ok then what can cause that the flag on the data logging screen does not show when fans come on?? Also ecu not getting the neutral switch signal to set the launch limiter manually..
2012-07-29 17:32:02
#75
Originally Posted by Payu
Originally Posted by JKTUNING
Originally Posted by Payu
Where the black wire of the four wire connector that goes into the NEMU goes into the ECU pins I an not getting some signals logged into the nemu like when fan comes on it doesnt show on the NEMU and neutral switch either..


The black wire is NOT used.

The only wires that are used are the orange, red and brown wires, so 3 out of the 4 wires on the connector.


Ok then what can cause that the flag on the data logging screen does not show when fans come on?? Also ecu not getting the neutral switch signal to set the launch limiter manually..


The only way it wouldn't be getting the neutral switch would be the wiring to the ECU.

Are you using the fan control in the software to kick the fans on or are you using the stock routine and just monitoring the flag?
2012-07-29 19:53:13
#76
^^Just looking at the flag
2012-08-04 07:09:10
#77
Hey John this may be a stupid question, but would I still be able to log with the breakout box with the PLX DM-6 (multigauge)? The Nemu package comes with the breakout box right?
2012-08-06 15:46:36
#78
Originally Posted by SentraThis96
Hey John this may be a stupid question, but would I still be able to log with the breakout box with the PLX DM-6 (multigauge)? The Nemu package comes with the breakout box right?


Yes, you will be able to log the PLX DM-6 with the ADC breakout box.

The ADC box is included in the package.
2012-10-31 03:46:29
#79
I finally have the NEMUs and ECUs back in stock.

All pending orders will ship this week!
2012-12-21 18:53:04
#80
Can i use this with almera gti n15 sr20de ecu? 1N401
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top