Thread: Newbie

Hey hey everyone how's it going new to forums and such but any ways I have a 95 b14 with an sr20de from a b13 runs great only 80k on her but my biggest problem is figuring out what lower control arms I can use for her the stock oems don't work for the new lower sway bar I have for her any ideas or info


Thanks

Welcome.

Type of sway bar? Pics of install or interference?

its from summit racing ill get a pic tomarrow but I got the lower control arms from summit a swell a few years ago and finaly got them installed and the driver side wheel is kicked out at the bottom im going to take it all apart tomarrow and check to see if I messed up somewhere ill post pics of the control arms and how the sway bar isn't seated right

im hope its an error on my end im still new to the sr20 community but I love the b14 chassis and from what I under stand its a bit of a pain to improve on the suspension

so with a closer inspection I found it was an error I made the control arm was loose and my wheel bearing is shot after takeing the control arm off and reseating it everything lines up sry and thank you

any suggestion on a wheel bearings im going to both sides I want to do hubs too and want to keep the stock ser rims

Nissan OEM.

Check our Vendors section and call Greg Vogel at G-Spec or Mark Merliss at Marsh Tuning. You cannot go wrong either way. They'll get you sorted.

Look up to the top of the page and right under the "SR20" in the logo is a button that says "Manifesto." Click on that.

Note all the write-ups and links which should help you in the future. Tons of info at your fingertips.

Right now, go to Suspension. Click the link that says "The Suspension Thread."

That is your suspension knowledge base. You read that, and you will be up to speed.

Awesome ty so much for the help