Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: new user from nc

+ Reply To Thread
Posts: 1-8 of 8
2014-09-18 18:06:23
#1
new user from nc
I have been building a s13 with sr20det redtop and have found this forum to be a huge help. I just bought a nismotronic ecu and there seems to be a lot of support for the platform on these forums so i hope to learn a lot!



(if anyone who sees this can help, I am trying to connect my aem uego to the adc0 input on the nemu breakout box. It is wired correctly but in the settings drop down there are no different options to choose what type of wideband i have..anyone know what to do in this case?)
Last edited by remy on 2014-09-18 at 18-23-21. Reason: question (nismotronic)
2014-09-23 13:39:22
#2
do i need to be approved to ask a question in the nismotronic section?

thanks
2014-10-01 12:23:08
#3
guess ill bump my lonely thread..

i drive a
1990 s13 hatch
s13 redtop sr20det
gt2871r
Nismotronic SA
DW 550cc injectors
z32 MAF
2014-10-01 14:57:59
#4
You are out of the new members group already, so you should be able to go post anywhere now. If you can't update us and I'll further look into your account.
2014-10-01 15:34:19
#5
I beleive its the blue wire that goes into the break out box. If the drop down menu does not recognize the wideband you still should get a reading in the guage layout section. my be a point - quater point off but nontheless it will display an afr reading. Also make sure the break out box is grounded to chasis.
2014-10-03 12:49:41
#6
thanks for the help

After some reading it looks like the white wire from the aem is the signal wire. I spliced into this wire and attached it to ADC0 on the breakout box. I am getting readings in nismotronic from the wideband but the numbers are very jumpy and in no way resemble readings on the AFR gauge in the car. JK has been very helpful over the phone and email but i had a week interruption due to a blown turbo/manifold gasket and am just now getting the car back together. Once i get the exhaust mounted back up I will rewire the ground on the AEM uego and hopefully I can record some useful logs. I will post them in the nismotronic forum...thanks for the help so far!
2014-10-05 13:04:49
#7
Where in NC are you from? I have many relatives in the thriving metropolis of Yadkinville
2014-10-07 22:23:47
#8
I am in Raleigh

I've heard about this thriving metropolis you speak of..
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top