Thread: Weekly meets 2008!!

so greg, i need 1 bolt for knuckle to strut and 1 for caliper to knuckle?

Hello Keo, sorry I get excited and speak fast or type fast and twist up twice in a while. There is a 1992 HP10 floating @ here off/on with a high port sr20de inside. So I got like 3 Walbro 255HP's used like a week each and the car kept stumbling under throttle. Later Greg told me that a 255HP is WAAAAY too much fuel and pressure for a stock 2.0L 4cly, you're actually flooding the car inadvertently because of the pressure and amount of fuel these 255HP's dump, I should have got a 190 Walbro. . .

So the Nismo FPR will control the Walbro 255HP so the car can run w/o stumbling & I will get the liquid gauge from GSpec and set it to 43.5 and let HP10 go from there.

I spoke with DC_Scotty and he plugged me into a company doing the injectors so I will also send them out to get serviceds after I figure out to get them out of the rail?????

mirrortints, your car needs a single bolt that attaches the caliper mounting bracket to the knuckle. Should be a 19mm and any year Sentra/G20 should be the same. Also you need at least (2) of the nuts that attach the STB to the strut top studs, any Nissan/Infiniti can donate these so when I next go to J/Y I will get for you & look out for another pop-out tray.

PS: =p -Me

greg,

read this

http://www.sr20-forum.com/general-maintenance/9282-how-hell-do-you-get-these-injectors-out.html

thanks greg, i may leave earlier saturday morning to stop at crazy rays then.

so i guess i will see you guys at 815 830??

yep, i will be at wally world

Its too cold already... Jen, you got that shop warm yet!! Hate the cold!

PM'd Greg the same instructions Keo.. That procedure really does work...

DC_Scotty, thank you for the info in regards to the injectors, I will get this done asap once I get them out of the fuel rail.

Keo, thank you for the help with these darn things & once I get them out I will proceed to get them ready to pack & ship to DC_Scotty's place.

mirrortints, how did all go today?

Slow_96R & Jen36 Monday eve I was moshing and lost, yes. . . LOST my deebit card, it should have ben here by Friday but it did not come? I will post when I get it and then I will order all the brake rebuild kits & get your ad22vf's on-point for you. -Me

I got the battery relocated in the battery box, I think I have most of the wiring done, just need to figure out how the fuse box under the dash sits. can you take a couple of pics?

I cleaned up and threw away a bunch of un needed trash, also, I do not know if the sensors on the clutch pedal are bypassed as I didnt read anything about them being used, not sure what they are for?

None of the sensors I got in the mail match up to the tranny forf some reason and could do not know which is the auto pnp plug. need a fsm to locate that and what these 5spd sensors are...

any idea if you could also see what the sensors are on urs and send a pic or two of what they are plugged into?

lost ur debit card, dangit! so did jensen! you know it comes mailed by usps, could get there any day by dec 1st