Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Weekly meets 2008!!

+ Reply To Thread
Posts: 361-370 of 554
2008-11-15 02:29:52
#361
Originally Posted by jen36
yep! she needs a motor


so what you gonna do???
2008-11-15 21:03:42
#362
im not going to do nuthing...i dont work on neons i need to find somebody that will
2008-11-16 16:32:51
#363
1) for one we finally got on the base no problems with the B15U car. Custom swapped vh45e awesome Sentra!

2) Made a new pal, also a friend of Keo's named Paul rolling in a white B13.

3) Finally met Keo and had a sneak peak at his HP11 and BBK mod, tight.

4) I got to let that 4.5L swapped B15U do some squats for the Jen-Cam channel 11 news.

5) I had some time to tear down the Sumuto calipers & sand the ad22vf's.

6) Thank you Jensen for the shoes, thank you!

7) Thank you Ed for teaching me how to use the balancer, next will come lathe & sand blasting maybe?

8) Jeff's car. . . What we got:
8a) I had noted axle driver side was already installed, your hub/knuckles were removed & PA hub/knuckles were installed, backs were cleaned & greased, OEM calipers front were installed & pistons compressed into bore with front slide pins greased, OEM rotors were installed, Jensen found (2) hub axle nuts for you, all cotter pins in tie rods & ball joints & axles are installed, all 8 lugs on the front and torqued within spec, all botls or & nuts are torqued within spec range, brake lines installed to calipers. . .

8) Jeff's car, What we did not get:
8b) fender splash cover installed, fog light HID conversion done,

Due to the need of swapping head gaskets and head bolt I would not be able to drop in the radiator, upeer STB, exhaust manifold, & related.

What we need or what I failed to be able to find? #1 we need a torque member to knuckle bolt for an HP11 or a B15U car because you only got (1) bolt on the passenger side caliper holding it to the torque member.

#2 you got (1) slight slit in your driver side ball joint boot, we did not cause this but I did notice it.

Slow_96R I got our old B12 rear struts for you here, awaiting pro install =p , -Me
2008-11-17 01:13:30
#364
thanks greg! you got lots done.

i am hoping to get there next week, but need to hook up with joel to finish the headgasket swap.

after that i can get the fuse box back in and all wires back in with battery mounted.
2008-11-17 18:24:05
#365
greg thanks for the love...man you guys up at jensens got it going on...im trying to be part of that family up there in aberdeen md...

jensen im coming to pick up that truck lid sence.that would give you more spcace in that back room...the check is in baby!!! hahaha...

..also jen thanks for showing me some on the ropes up at the shop.
2008-11-18 01:40:40
#366
it appears there were a few folk up there on Sat. i thought Scotty said they were turning people back and it was a bad day Not to sure about this Saturday coming and Friday is a wash already Jeff we gotta find a way to get that gasket done.
2008-11-18 04:27:38
#367
they turned me back on Saturday too.
2008-11-18 17:19:45
#368
I'm gonna start driving up dressed in camouflage...
2008-11-18 21:26:29
#369
Originally Posted by 87SENTRASE
1) for one we finally got on the base no problems with the B15U car. Custom swapped vh45e awesome Sentra!


PICS?! Uh, sounds like a tight fit.
2008-11-18 21:53:27
#370
Datsun,
Originally Posted by mirrortints
thanks greg! you got lots done. i am hoping to get there next week, but need to hook up with joel to finish the headgasket swap. after that i can get the fuse box back in and all wires back in with battery mounted.

*No problem Bro, we all are swinging hard blows and fighting a slow tough uphill battle but "even the mightiest oak shall bend to the winds of fate" so shall we to stand victorious!!!!*

Originally Posted by p'
greg thanks for the love...man you guys up at jensens got it going on...im trying to be part of that family up there in aberdeen md... jensen im coming to pick up that truck lid sence.that would give you more spcace in that back room...the check is in baby!!! hahaha...
..also jen thanks for showing me some on the ropes up at the shop.

*Thank you, pleasure was mine to always be of honest service to the crew, did you make it up to j/y yet for that/those covers?*

Originally Posted by Slow
it appears there were a few folk up there on Sat. i thought Scotty said they were turning people back and it was a bad day Not to sure about this Saturday coming and Friday is a wash already Jeff we gotta find a way to get that gasket done.

*Werd, I just flashed my Govt. pass (green-card) and whizzed on in, as usual, so it's all good I do not have a lysince or whatever you Americans call it? =| *

Originally Posted by Keo
they turned me back on Saturday too.

*You all should have piled in my B15U and we all rolled in together, I've got "status" with the MP's because I got paper.*

Originally Posted by mirrortints
I'm gonna start driving up dressed in camouflage...

*I just wear sandals, smock, & a turbin. . . I always get in, I try to tuck my beard though because I do not want to attrack undue attention!*

Originally Posted by blairellis
PICS?! Uh, sounds like a tight fit.

*My last time I came I had a 4banger under the hood, now I got 8banger all custom actually a vh41de I just do not flash it on because of WOWS and OOHS but trust I got plenty of horse power, plenty of pedal for any det @ and when I MASH-IT the @ss slams the ground so hard I damn near bash my muffler up! I gotta charge my camera, and find my memory card*

Madlove to alluh-yall, -Me

PS: I had a sukker on the beltway in a '05 Civic EX and a sukker with a '07 LS460 STRUGGLING to stay within 6 cars behind my old tub! I am there with a black & mild in my mouth, 2 fingers on the wheel, bouncing like an old Caddy, & cruising with a good 4" of pedal still!!!!!!!!!!!!!!!!!!!!!!!!!SHET!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top