Thread: clearing out parts sale in SE PA...near Philly

Locals preferred. No pictures yet...they are definitely on the way...this is a "whet-your-appetite" post.

If you have g20 and always wanted a black interior...you are in luck. 150 dollars will buy you carpet to ceiling retrofit. It's in pretty good condition, barring the seats in these areas: driver side seat pad seam split, passenger front seats back-side has some issues...PO had the child seat installed behind the passenger seat and the child poked at the back side of the seat leaving small white poke holes, and lastly the rear seat back rest has sun damage along the top-side head rest area where it is exposed to sun damage...cracking is evident.

For the good ....I have every piece top-to-bottom, including driver and passenger air bags with airbag module...the carpet is nice. If it wasn't such a chore I would have put it into my current G20 that has black interior.

anyway I'm asking 150 picked up for the whole interior!!!! clearance price...no negotiation.

Fidanza flywheel (108)...175, JGY street clutch...150, Nismo 740cc injectors....300, z32 MAF...75, GTIR T28 set up (all stock heat-shields, wastegate, and oil/water lines)...500, Spearco 26x6x3 intercooler, 2.5 intercooler piping with 1G DSM BOV...250 (with IC), Calum basic ECU...150, Walboro 255 fuel pump in stock sleeve (just pull old pump out and install this one)...100, UR crank and wP pulley set...100, manual boost controller...30, Nismo FPR with in-line fuel gauge...120.

http://www.sr20-forum.com/classifieds-driveline/75502-fidanza-flywheel-108-jgy-6-puck-sprung-clutch-flywheel-bolts.html

scroll through my photobucket for fuel pump, IC & piping pics http://s241.photobucket.com/user/Nitelife_02/media/20140915_185114_zpsc973dc33.jpg.html

I will be traveling to Carlstadt NJ around OCT 10th so if any NY,North Jersey, or NE people are interested in parts and can meet there that is an option.

I obviously haven't taken pictures of everything but I am not trying to hide anything and will send whatever pictures you ask for...send me a PM.

universal intercooler piping?

It's 2.5 alumanized steel welded up to run through where the windshield wiper fluid resevoir was then back up through where CAI would run. Also used the old Ebay Accord aluminum piping for intake pipe and up-pipe. Really the cold-side is the only part welded together. Picture should give you an idea of what you get.

Not the prettiest welds as my room-mate was using Mig without gas, but it held 15 PSI no issues.

Still have any leftover NX parts? Looking for automatic door locks/latches now

I don't have any door lock parts Lee. sorry