Thread: Anybody with a RR block in good condition?

Need a RR block with crank and main caps in good condition.

I can trade a 86.5mm block with crank and main caps. Good condition, machine shop says maybe a hone and it's ready.

RR ftw. I don't have anything but I think RR engines are neat.

So true! I get a call yesterday saying that I need to get another block and he says he'll show me when I get there. Puts the piston in one of the cylinders and wiggles it around and says the machine shop guy measured the cylinders and said they're already machined for 86.5mm.

Sucks! But, I'll go to the junkyard this weekend and see what's there.

Jeff, pm >] Teal200sx, I believe he has a spare rr block.

Will do, thanks!

That's @Teal97 in Washington state?

Jeff, there is a 2000+ G20 with fairly low miles at the Jessup Crazy Rays (may still be there).

They are clearing out inventory much quicker than expected nowadays, so you may want to make your way down there sooner than later

Keeping an eye out on this

Gotcha, thanks Chris! I will check that out, it's a little closer to me than Hawkins Pt. How is that one set-up? Where would I find the G20 and import cars?

I've only been to that one once. I'll be heading up on Friday, taking the day off of work.

Once you walk in, you go straight and down the hill. You will cross the bridge and directly ahead of you will be trucks/Vans/SUVs, etcs. Once you go over the bridge, turn right and continue all the way back until you start to see import vehicles. Keep going and at the top of the small hill, two G20s should present themselves to you

They are both white and one is on the left behind a Corolla and the other is directly diagonally behind (left rear diagonal) about 10-15 feet (you will cannot miss it if you find one)

Goodluck! I hope they are still there!

Cool, sounds like the same area they were in about 15 years ago.

Jeff, let me know what time you're going, I need some P11 parts too.