Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Shot, score!!

+ Reply To Thread
Posts: 11-20 of 24
2014-01-20 15:22:00
#11
Good job finding them. Nice grabs for you, I saw the se-r with the dogbone pulled, lol. I also saw it had Tein logos on side, I couldn't tell if it had aftermarket springs or not, didn't have the time to mess around, pulled the heater resistor, that was it. I had to go raid that p10's drivers suspension.
2014-01-20 15:27:39
#12
Originally Posted by blckse-r
... saw it had Tein logos on side, I couldn't tell if it had aftermarket springs or not...


Didn't look like it to me, but I bet that thing had about 150 HP worth of stickers on it.
2014-01-23 23:16:38
#13
good find, i haven't been to easy pull in years but you can sometimes find stuff there as well.
2014-01-23 23:43:55
#14
Originally Posted by tkocrewsr
good find, i haven't been to easy pull in years but you can sometimes find stuff there as well.


EZ Pull & Save in New Ringgold? I try to get up there at least once a year.
2014-01-23 23:49:32
#15
Originally Posted by SE-RMonkey
Originally Posted by tkocrewsr
good find, i haven't been to easy pull in years but you can sometimes find stuff there as well.


EZ Pull & Save in New Ringgold? I try to get up there at least once a year.


Yea, it's been 3-4 years since ive been there, but they always had a big selection. At the time i wasn't looking for fwd sr20 crap so i never took notice of how much was there.
2014-01-24 00:08:44
#16
Originally Posted by tkocrewsr
Originally Posted by SE-RMonkey
Originally Posted by tkocrewsr
good find, i haven't been to easy pull in years but you can sometimes find stuff there as well.


EZ Pull & Save in New Ringgold? I try to get up there at least once a year.


Yea, it's been 3-4 years since ive been there, but they always had a big selection. At the time i wasn't looking for fwd sr20 crap so i never took notice of how much was there.


I was there last spring and grabbed up a nice, rust-free fender for my SE-R. I just bought a P10 and could use a few bits, so I may head up if the weather ever warms up again.

Pottstown? Are you the guy who was in the service down south. I remember a thread from not to long ago where you (I think?) mentioned that.
2014-01-24 00:44:55
#17
@SE-RMonkey yea that's me, I'm still down in Georgia. I'll be back in Pa February 1st, although I have an apartment in Mt. Penn/Reading area.
2014-01-28 12:59:46
#18
Originally Posted by blckse-r
Good job finding them. Nice grabs for you, I saw the se-r with the dogbone pulled, lol. I also saw it had Tein logos on side, I couldn't tell if it had aftermarket springs or not, didn't have the time to mess around, pulled the heater resistor, that was it. I had to go raid that p10's drivers suspension.


You came all the way from York to go to Harry's in Pennsburg? That's pretty far....and I thought I was crazy.

You guys see any E39's up there? I need some interior bits.
2014-01-28 13:03:28
#19
Originally Posted by hammerin
Originally Posted by blckse-r
Good job finding them. Nice grabs for you, I saw the se-r with the dogbone pulled, lol. I also saw it had Tein logos on side, I couldn't tell if it had aftermarket springs or not, didn't have the time to mess around, pulled the heater resistor, that was it. I had to go raid that p10's drivers suspension.


You came all the way from York to go to Harry's in Pennsburg? That's pretty far....and I thought I was crazy.

You guys see any E39's up there? I need some interior bits.


I came, I saw, I conquered, haha. No really, I needed parts asap for my g20 that was in an accident, I knew the parts were there, thanks to @SE-RMonkey, so that was that. Had g20 out for a spin Saturday thanks to the trip.
2014-01-28 13:10:34
#20
Originally Posted by Storm88000
Hey SE-RMonkey let me know when you're going there next time

BTW anyone remember when new Hotshot headers were $500 ?? Then the eBay knockoffs came and POOF - Hotshot out of business



It's all relative. I've been scouting out my options for the M5. There doesn't seem to be anything decent for under $2000. $500 would be a steal. I'm considering taking up welding and making headers for the BMW crowd........no really.

And, yes I did pay around $500 for a new HotShot Gen5 back in the day....did we have a choice?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top