Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: we will know in 1 day

+ Reply To Thread
Posts: 1-10 of 19
2008-04-04 21:23:48
#1
we will know in 1 day
ok. after getting my fifth block from rob i finally decided that this block was good and i took it to the machine shop for decking, honeing, measureing for bearing sizes yadda yadda. i find out the piston skirts are badly worn and un-useable, the cyl walls are scratched and need to be bored out. however the engine currently has a grade 2 piston in it already and thats the only piston size gregV sells.

i have ONE block sitting here in the shop and i mesure an 85.9mm bore. if i can use this block and bore it out to accept grade 2 pistons i will use it. if i can not use this block i am done. i have not enjoyed moddifying my car at all for awhile now.......hell i really dont even like driving it anymore. if this block is un-useable i will be selling the car.................done. i need no words of encouragement because i have made up my mind. im sick and tired of spending all my money on my cars and not haveing enough to move out of my parents house.



end rant. start making offers now, i will entertain any and all offers as long as i dont loose a **** load of money.
2008-04-04 21:28:19
#2
I want the block you got from Rob!!
2008-04-04 21:31:45
#3
bore it to 87 mm man, whats so stressfull about that, grab some pistons, reinstall the motor and be done.

good luck.

stratton.
2008-04-04 21:39:21
#4
Originally Posted by STRATTON
bore it to 87 mm man, whats so stressfull about that, grab some pistons, reinstall the motor and be done.

good luck.

stratton.


he's staying N/A, that means he have to spend more $$ for piston and he already have some 10:1's

for me, I'll need it to be 87mm anyways so it's perfect!
2008-04-04 21:39:48
#5
5th block!?!?!?!
2008-04-04 21:41:58
#6
Originally Posted by XxToKeSxX
5th block!?!?!?!


yup, we have 5 blocks at the shop. all belong to Pete. actually we have 4 blocks, I think Brad got one of them.
2008-04-04 22:09:08
#7
Originally Posted by XxToKeSxX
5th block!?!?!?!


1 had piston slap, 1 had a chuck of cyl wall missing, 1 had huge ring grooves, 1 had more piston slap, 1 had no bearing in #1 rod and crank was JACKED and cyl were good............bigger than grade 3 pistons i will not buy expencive aftermarket pistons. current has scratched cyl walls.
2008-04-04 22:19:00
#8
Originally Posted by Keo
....I think Brad got one of them.


Yup, currently waiting patiently in line @ Mazworx
2008-04-04 22:23:20
#9
Pete--

I know you don't want to hear any advice...but I've been there man, sometimes you just have to stop thinking about it for a while and then come back to it.
2008-04-05 03:14:52
#10
Originally Posted by Naghebe
Yup, currently waiting patiently in line @ Mazworx


the line isn't that long unless you haven't paid
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top