Thread: Looking for CSK (or someone to prepare set)

As the title states.

I am looking for a proper damper/spring setup for a B14 chassis SE-R.

What I am looking for is someone who could do possibly:

1) Shorten the fronts and install either B14 or B15 yellows
2) Weld on a perch for GC coils

I could possibly get my hands on a set of housings, but if you prefer to get them yourself, that is also fine with me

You can PM me with any/all details so we can talk as I also had a question about spring length for front vs back, and a few other details

Also, if anyone has any contact information for Steve Foltz, please do not hesitate to send me a pm

Bottom line is, I want to run externally adjustable (OTS) yellows, both front and back, with GC coilover and camber plate setup

Thanks

PM is best form of contact

Steve won't reply, he's on my facebook and he will talk to you about anything but shortened Koni's..

all of my research thus far has surrounded B13 setups.. (check my threads created by me)

I am comfortable doing B13 housings with OE diameter springs.. but welding on the perch for GC coils, I'd imagine if someone were to prep those for you, they'd want $125 per axle.. on top of the cost of the strut housings and inserts..

Steve used to charge $75 just to insert the strut in the housing.. this was a few years ago..

Pm sent

What happened as to why Steve will not talk koni?? Also, does that also mean he will not do any work?? I pretty have the same setup I just need someone to handle the labor as time constraints (as well as my experience level) do not allow me to tackle such a job)

Keo, pm responded.