Thread: NJ NY PA sr20 GURU HELP PLEASE

if any body has some time to help out a sr20 member please HELP ME OUT.


im trying to get my car started and nothing


i bought what i had to buy for it and nothing. still just cranking and cranking but nothing.


i have a 94 sentra 1.6 E that i did a sr20 swap to
the motor and ECU came out of a 91 se-r


i swaped what i could swap out i used the 91 harness and it just cranked so

i bought the 94 harness to match the car and nothing still just cranks.
im going nuts trying to figure out what it could be and im clueless.

i have done plenty of DSM SWAPS and HONDA SWAPS but this takes the cake.

i know that the motor starts because before i took it out of the other car it cranked up and i was able to move it and park it to start taking it apart.

SO im asking if anybody has some time during the day after work or weekend to please come here and help me out and just look over the car with me and tell me what im not seeing

i dont have alot of money but i can buy food and beer and maybe a few bucks for helping me out.

the car is located in NORTH NEW JERSEY IN CLIFFSIDE PARK.

please help a member out.

u can email my phone at [email]maykoiphone@yahoo.com[/email] which whould be that fasted way to reach me.

put the 94 harness back it. the reason why its probably cranking and craking is because the pins for the under dash harness clips do not match the 91 harness and the car will not start.