Pre-Purchase: 32A Helical LSD
Hey guys/gals,
I've made a new thread for this, as we now have the minimum numbers required to proceed.
The number of people allowed on the list is not set in stone (although we do require a minimum of 5 confirmed), however, please note that once this initial batch is complete, our MSRP will be more expensive, so if you know you definitely want an LSD within the next few months, you can save a few $$$'s by joining this pre-purchase
ETA: Approx. 3-4 months after we receive the oem sample
Cost: $684.95
Deposit Required: $100 non-refundable (but is transferable)
Procedure:
1) We receive the oem sample
2) We take our measurements
3) We receive the initial deposits (ongoing, as it is not limited to just 5)
4) We manufacture the initial prototype
5) We send the prototype to the proposed tester (you guys will need to discuss among you who you want this to be)
6) If any changes need to be made for final production, we can make those changes after the testing
7) Once the prototype (plus any changes) is approved, we will proceed with final production
8) Upon completion, remainder of balance is due before shipment
Confirmed List: (must be 100% able to pay the $100 deposit within the next couple weeks)
- Gareth (via email): PAID
- jagy x 3: PAID
- gtirwezz x 2: PAID
- niSSSdan
- naedtrax: PAID
If you have any questions, or would like to be added to the list, please let me know
I've made a new thread for this, as we now have the minimum numbers required to proceed.
The number of people allowed on the list is not set in stone (although we do require a minimum of 5 confirmed), however, please note that once this initial batch is complete, our MSRP will be more expensive, so if you know you definitely want an LSD within the next few months, you can save a few $$$'s by joining this pre-purchase
ETA: Approx. 3-4 months after we receive the oem sample
Cost: $684.95
Deposit Required: $100 non-refundable (but is transferable)
Procedure:
1) We receive the oem sample
2) We take our measurements
3) We receive the initial deposits (ongoing, as it is not limited to just 5)
4) We manufacture the initial prototype
5) We send the prototype to the proposed tester (you guys will need to discuss among you who you want this to be)
6) If any changes need to be made for final production, we can make those changes after the testing
7) Once the prototype (plus any changes) is approved, we will proceed with final production
8) Upon completion, remainder of balance is due before shipment
Confirmed List: (must be 100% able to pay the $100 deposit within the next couple weeks)
- Gareth (via email): PAID
- jagy x 3: PAID
- gtirwezz x 2: PAID
- niSSSdan
- naedtrax: PAID
If you have any questions, or would like to be added to the list, please let me know
Last edited by MFactory
on 2013-10-05
at 10-35-12.
Be the first to like this post.
Originally Posted by unijabnx2000 
Back to top
