vet 90mm pistons 11.1cr & kelford cams
Im looking for high compression vet pistons for my built!
9.2cr is too low for me and when i was searching the web i read somewhere that mazworks have 11.1cr 90mm bore but i cant find them at mazworks website
also im running N1 cams but they have too much overlap and low dergrees that dont aloud me to rev over 9k without loosing power
so i like to change them with 184-t cams,
the problem is 184-t have 11.5 valve lift that means 0.5 lower than N1 cams,and heres my question can i have vvl turbo cams with higher lift than 184-t
9.2cr is too low for me and when i was searching the web i read somewhere that mazworks have 11.1cr 90mm bore but i cant find them at mazworks website
also im running N1 cams but they have too much overlap and low dergrees that dont aloud me to rev over 9k without loosing power
so i like to change them with 184-t cams,
the problem is 184-t have 11.5 valve lift that means 0.5 lower than N1 cams,and heres my question can i have vvl turbo cams with higher lift than 184-t
Be the first to like this post.
Back to top
