Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: FS: Full Pulsar GTi-R Built Longblock + Turbo Kit

+ Reply To Thread
Posts: 1-2 of 2
2013-10-17 16:08:26
FS: Full Pulsar GTi-R Built Longblock + Turbo Kit
We had built this setup for a customer but the customer does not want to pay his bills and doesnt want this build anymore. The motor and parts have never been ran on. It is currently available at our facility. This will only be sold as a complete longblock or complete turbo kit. Will not part out. We can do a combination deal for both longblock and turbo kit. Please PM or email [email]eric@mazworx.com[/email] for pricing or more information.

Spec for the engines are as follows:

Core Engine


Darton Sleeves
New OEM Oil Pump RNN14
Mazworx Main Stud Kit
Custom CP Pistons 90mm 10.0:1
Carrillo Connecting Rods WMC
ACL Thrust Washer
ACL Race Rod Bearing
ACL Race Main Bearing
ARP Head Studs
Nismo Pilot Roller Bearing

Clean R/R Oil Ports
Sleeve install
19mm Rod Bearing Machining
Bore/Hone w/torque plate
Line Bore
Step Deck
Polish/Balance Crank
Assemble Short Block

Supertech Dual Valve Springs 75lbs
Supertech Titanium Retainers
Supertech Intake Valves
Supertech Exhaust Valves
Supertech Intake Valve Guides
Supertech Exhaust Valve Guides
Supertech Intake Valve Seals
Supertech Exhaust Valve Seals
Tomei Solid Camshaft 280 Intake
Tomei Solid Camshaft 280 Exhaust
Tomei Cam Gears
Cosworth 1.1mm head gasket

Clean R/R Oil Ports
CNC Combustion Chamber
Stage 2 Port & Polish
R/R Valve Guides
Competition 5 Angle Valve Job
Resurface Head

OEM Timing Chain
Crank Key
Crank Sprocket
Timing Chain Tensioner
Tensioner Gasket
Timing Chain Guide Fixed
Timing Chain Guide Adjustable
Adjustable Chain Guide Bolt
Rear Main Seal
Water Pump
Engine Bolt Kit
OEM Gasket Kit
Assemble Long Block/Degree Cams

FWD Ramhorn Bottom Mount Manifold
3" Downpipe
W/G Dumptube
Turbo Lines
Garrett GTX3582R
Tial MVR Black
Tial Exhaust Housing .82 a/r
Tial Inlet Clamp Housing
Tial Outlet Clamp Housing
Tial Outlet Flange Housing
Oil Block Adapter
Remote Filter Mount
Oil Filter
1/2 NPT to -10an fitting
Hose end -10an straight
Hose end -10an 90 degree
Pro-Lite 250 Braided Hose 6ft -10an
New KA24DE alternator
Alternator Belt

Mishimoto X-Line Radiator 92-00 Civic
Weld Bungs Aluminum -16an
Weld Bungs Labor
Nismo Thermostat
2013-12-04 07:36:57
How much for the turbo setup?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top