Thread: 6 speed swap kit issues

hey guys I thought it would be a good idea to bring this to your attention.
there are a few of us who purchased the 6 speed swap from you and are having an issue with the trans mount bushing be pulled back and almost off the bracket..
Take a look.. thanks
http://www.sr20-forum.com/turbo/64976-6-speed-swap-poll-issues.html#post878433

We are currently looking into the issue. So far we've only seen 2-3 cases of these, but we have sold alot of these. But regardless we are going to be looking into it.

kool thanks Guys keep up the good work..

Thank you for looking into this issue.

Im sure mine would have had issues as well as mine also wasnt sitting centered between the brackets but because I am using an altima mount bracket on the trans it wraps around the mount more than the spec v one does as I drilled new holes for alignment. So the urethane mount itself sits further down in the bracket so to say, but you can still tell it is being tweeked a bit but mine so far hasnt pushed all the way through and damaged the urethane.

Definitely seems like an alignment problem of your mount bracket on the frame rail for the trans. Pretty simple fix it seems. There is a good picture on there posted by the OP of where its actually sitting and im sure he could get you some measurements to show how off center it is in the bracket.

Anyways thanks for looking into it.

I got a kit, just no time to install it yet

We are currently looking for a local car to come in and double check everything once again. These mounts are all made on jigs since day one so its pretty hard to say that there is in-consistancy but there very well possibly be.

We would like to right now get a list of people who have had issues with this and kindly please email me at [email]eric@mazworx.com[/email] so we have record of who and when these kits were bought to find out when they were produced.

Thanks

my mount has split on the front side(closest to the front of car) but i dont drive the car and i still need to get it back running again...ill post up pics this weekend

I think these pics are worth showing to you guys.

...and results in this:



...that's a brand new insert, about a month old.