Thread: Oil Catch Cans?

subscribed for updates

Great news!

Here is something we came up with. Its pretty much the best we can get due to limitation of space in the engine bay without having to relocate very much. You will have to relocate the module for the cruise control and this will bolt into the existing location of where the cruise control module goes.

It will have 3 -10an fittings welded on, which 2 of them will go to your valve cover and one back into the factory return.

Let us know what you guys think.

[img]http://www.mazworx.com/pics/fwd catchcan_1.jpg[/img]
[img]http://www.mazworx.com/pics/fwd catchcan_2.jpg[/img]

I think this might not work for those with an O2 Induction intake though.

Not to be the devils advocate, but what about something that goes in the battery area? I think most of us have our batteries relocated. Would you be willing to look at an idea something if I mock something up?
I currently have my ignition locked where the battery was, but maybe something could be made to hold these items as well?

I wouldnt mind something in the battery spot as well. it's cheap enough to move it and if you're spending the cash on a catch can, why not relocate the batt anyways since it's good for the battery.

how much r this catchcans going to cost? i dont mind been the guinea pig and trying it out to c if its going to work with the o2 induction manifold r not .

Agreed. Battery location.

Need to get some input from the turbo guys also, since believe that the i/c piping runs pretty close to there also.

Battery spot would be my choice. I've got a smaller battery but still have some room.