Thread: Oil Catch Cans?

Would you guys consider making a nice custom fit oil catch can?

I would be interested in one for a B13.

This is one that T1 makes.
http://www.t1racedevelopment.com/index.php?page=shop.product_details&category_id=1&flypage=Default.tpl&product_id=131&option=com_virtuemart&Itemid=72

Do you have a pic?

Here is the T1 catch can


Here it is mounted where the OEM Honda batter goes




I don't need one that big but, I would like one that has a custom fit with proper mounting hardware. Pretty much I don't want the ordinary GReddy catch.

With those you relocate the battery to the back or elsewhere. Will check the engine bay and see what we can do. There isnt much room for anything in these chassis.

I have a suggestion. Something that Jamie has on his car, that works with "MOST" exhaust manifolds. It's a piece that goes in place of the stock catchcan, and works flawlessly, all while dumping excess blow-by oil (filtered) back into the crankcase. The PCV hose and two other ports on the valvecover all divert into the catchcan, and then from the catchcan down into the crankcase. IIRC the catchcan also has a breather filter? Not 100% sure. I've been wanting one for AGES...

Most? I'm pretty sure it only works on his because his turbo is 'reversed', other than it would have to be a bottom mount and even some of those wouldn’t work. I remembered talking to Russ (who designed it), and he said it was definitely one of.

J's turbo setup isn't reversed?

Bottom line: I want one

My boy has this in his eg coupe with a 500whp B16... this can is huge and so are the lines. Does its job good though. You gotta let some of that pressure out of the crankcase when boosting as hard as he is

Excellent.

Thanks for looking into this. I want somthing nice that fit well. I am huge fan of custom made parts hence requesting this.

We should have something mocked up in a few days.