Andreas is in the process of making a proper fitting flywheel that is meant for obdII, Yes the bellhousing can be drilled for the sensor, it has the markings there for it. The flywheel being made will use an off the shelf clutch.
0 Likes
Be the first to like this post.
1992 Nissan Sentra SE-R - Fully Built SR20VE, BWS400SX Billet 67mm and much more
JMS Racing tuned to 716whp, 423wtq at 29psi
10.5 @ 149.2mph to date I believe the fastest trap speed SE-R, Much more to come with some changes!
THANK YOU! I am in the process of getting parts together for this swap. I saw a mint Spec V setup from an 04 in a local junk yard so I am thinking of buying everything I need from it! Front hubs, rear beam, brakes, etc as well.
Will a B13 clutch and PP work with your flywheel on the 6 speed?
Originally Posted by mazworxsales The issues with the flywheel and clutch have been solved. This clutch kit and flywheel we offer will work with the right components that we will also provide.
Thanks
Originally Posted by curtdragon Where is the clutch kit? I only see the flywheel on the website
Originally Posted by curtdragon ? Clutch kit?
bump. I havent seen the clutch that does with that flywheel either...
Join Date: 2007-12-11 Location: Levittown, Pennsylvania, United States Posts: 645 Trader Score: 0 (0%)
Originally Posted by Andreas All Factory SR20s have the same number of teeth on the flywheel. This flywheel teeth thing is only for aftermarket flywheels.
you sure? i have a old sr flywheel (91-93?) & a newer one (00+) & one has 108 teeth & the other has 109 teeth