Thread: How To: VW Golf Projector Headlights

makes me wish i had an nx...damn these look good.

Got a question anyone know the harness for these lights?

I just noticed the colors aren't the same as the others I have seen. I have brown, white, silver and yellow.

Never mind lol it was a problem with the ground at the plug. The bolt in is all good except for the halo lights I duno if I'm going to wire those up. Also my High beams on my NX stopped working before the car broke down. I'm only getting something like 8v from the plug with the high beams on.

Didn't try to see if I could level them off yet. There not too far apart like I feared when I was doing the install. Hooked up the Hailo/fog lights to the old fog light switch and did the mod so the head lights do not need to be on for them to turn on.

Looking good. I can't wait to get mine installed soon. They have been sitting since Christmas. One thing to check on the high beams... apparently the switch can just wear out on the off/on switch, or can just become dirty. I'd recommend take the light switch unit out and cleaning it I hear it helps. I'm about to try it to mine soon before I put these lights in.

Thanks I'll try that tomorrow and see if that works.

i wanted those lights but they cost to much for me right then mine only cost 80 for the pair

Hey Andy where did you get your lights from. Ive been trying to find a good source other than random-ass eBay vendors LOL

I found it on Ebay but that was a while ago. I see ones like mine but the housing isn't blacked out it's chromed.

RB240, did you try cleaning/messing with the light switch at all yet?