Thread: How To: B13 93-94 Sentra Linear Grill

So i was tired of seeing that ugly and boring regular usdm 93-94 sentra grill.
Things you will need are:
93 Grill
Dremel
Sawsaw
Sandpaper
Bondo
napkins
Primer
paint
patience

Ok so its only took me about 1 hour to do. So I went to the junk yard to get a spare 93 b13 grill so i wont kill my stock one. on to the pictures



So first things first is cut the pieces that let the 2 lines off


tricky part is cutting the middle piece, be careful because if you go to far it wont look nice aafter

Use the dremel for the top layer you need to trim off carefully





here it is both top and bottom lines cut off




Next step, I used napkins to keep the bondo from falling through, ghetto but it does the job.



Next step, Mix the bondo and apply


Next Use the sandpaper and sand it down

After that apply next layer of bondo that didnt cover the first


Let it dry for a bit and take a break,lol



Next step apply primer and paint it



there you go, congrats you made a linear grill.



peace!

Sweet write-up man!!



Dudeman

Sweet, looks helpful

Looks good if I had a stock grill I would do this!

Any better pics of it installed?

....

I like the looks, I think it does in my car!

Is there any way to use the sunny emblem in the stock grill?

Excellent write up!